40-Fuß-Faltcontainerhaus, Lieferant von Faltfertighäusern

Open Length, Deck Area and Folded Slab

Open, the 40ft foldable container house runs 11.8 m along the long wall, twice the 5.8 m of a single module, and its deck grows to about 29.5 m², enough for two rooms or one open office. Folded, the body keeps a 390 mm depth and the 2430 mm height of the short version. At 2,200 kg the package still lifts on four corner castings, and a standard spreader does the rest. At full stretch the deck takes two rooms or one open office, and the longer wall means the roof rail arrives in two joined lengths. Folded, the slab still rides the same truck bed as the short unit, only the straps run further apart.

Mid Span Columns and Doubled Hinge Sets

A long shell needs more steel, so two extra posts stand at mid span and carry the roof between the ends of the body, columns keeping the U-groove profile with a 1.5 mm wall. The sill beam is spliced rather than run in one piece. Hinge count doubles to eight sets of 304 stainless, because the fold line is twice as long. Splice plates at mid span are the joint to inspect on arrival.

Frame and hinge count
· Two extra columns at mid span, same section as corners
· Column wall of 1.5 mm, galvanized before paint
· Sill beam with bolted splice plates at centre
· Eight hinge sets, 304 stainless, 3 mm plate
· Four corner castings for lift and stack

Wall Panel, Roof Sheet and Joined Decks

Walls carry the same 50 mm rock wool panel with 0.28 mm steel skins, only in longer runs, while a 0.45 mm profiled sheet above spans 30 mm of rock wool across the short direction, so no seam lands on the walk line. Two 15 mm MGO decks meet on a steel splice at mid span, capped with a 1.6 mm wear coat. Shadow gap of 5 mm hides the splice line where the two decks meet at the ceiling.

Split Circuits, Doors and Window Sets

Circuits split. One room goes dark. Its neighbour keeps the lights. The standard fit is one breaker, three sockets and five LED lights along the length. Cable runs in the ceiling void and drops at the partition point, which keeps both halves serviceable. Leakage protection covers the socket ring, and every breaker carries a printed label.

An aluminium entry door with a 1,970 mm leaf serves the unit at one end of the body. A long body needs a second exit, so a matching door goes at the far end. Four windows of 1,215 mm give each room its own cross flow, and every one arrives with a fly screen fitted at the plant. Door frames are braced before folding, so the leaf still latches after the trip.

Setting a Long Unit on Level Ground

A long unit wants a flat pad and a straight line. Level is checked under the four castings before anything else. Walls open one at a time, and the mid span posts locate on their pins. Splice plates at the centre are bolted before the second wall comes free. and no welding happens anywhere on the site.

Produktionsablauf in der Werkstatt

Werkseinführung

Wir sind ein professioneller Hersteller von Fertigcontainerhäusern, erweiterbaren Containerhäusern, faltbaren Containerhäusern und mobilen Fertigbädern. Wir entwickeln, produzieren und exportieren modulare Wohnlösungen für Hotels, Villen, Büros, Studentenwohnheime, Lagerhallen, Werkstätten und Baustellen. Unser Werk in Guangzhou erstreckt sich über eine Fläche von 50.000 Quadratmetern. Besucher sind herzlich willkommen.