Faltcontainerhaus in X-Form mit Holzmaserung, schwarzem Rahmen

Panel Area, Weight and Folded Pack

Open, the wood grain x type folding container house gives 14.5 m². Folded, the cabin becomes a flat pack that stores in a small yard. A standard unit weighs 1,100 kg, and the film, trim and floor upgrade add 40 kg to the total. That brings the finished cabin to 1,140 kg on the shipping list. Low weight keeps crane time short.

Black Powder Coated Frame and Castings

Welded square tube makes the frame, powder coated black at the 9005 reference. Matt coat hides weld dressing better than gloss. Corner castings are masked before coating, because the machined face has to stay bare. Stainless hinges and pins keep the fold line free of rust, and the posts stand clear of the panels so the black outline stays crisp.

Entry Door, Sliding Windows and Glazing

Entry door hangs in the plant at a 970 mm opening. Windows are sliding sashes in black frames. Glazing sits in a rubber gasket, and each sash carries a fly screen and a drain slot facing out. Hardware is stainless, down to hinges, handles and the lock keep, and door and window positions follow the layout drawing before the frame is welded.

Interior Walls Behind the Dark Shell

Inside, the wood grain x type folding container house can take a light inner panel instead of the dark exterior face. With dark walls against a dark shell the room feels like a shed, so most orders swap the inner skin. That change costs little. It lifts the light level in a small room. Ceiling and wall panels meet in a shadow line rather than an open gap, and wiring runs behind them to marked points.

Folding the Cabin Without Touch Up

Folding the wood grain x type folding container house takes four steps and a small crew. Once the pack lands on pads, straps come off and the roof frame rises. Walls swing up on their hinges, and pins lock the corners. Cam locks pull the roof down onto the gasket, and the painted frame and film need no touch up afterwards.

Loading, Trim Kit and Surface Care

Cabins ship folded, and a 40HQ container carries a full stack at 50 mm wall thickness. Each pack is cradled, filmed and packed with desiccant for a sea crossing. Trim kit, spare rollers, hinge pins and touch up paint travel in the crate. The film wants a soft cloth and no solvent. Sites use the cabin as an office, a shop, a clinic or a guest room.

Produktionsablauf in der Werkstatt

Werkseinführung

Wir sind ein professioneller Hersteller von Fertigcontainerhäusern, erweiterbaren Containerhäusern, faltbaren Containerhäusern und mobilen Fertigbädern. Wir entwickeln, produzieren und exportieren modulare Wohnlösungen für Hotels, Villen, Büros, Studentenwohnheime, Lagerhallen, Werkstätten und Baustellen. Unser Werk in Guangzhou erstreckt sich über eine Fläche von 50.000 Quadratmetern. Besucher sind herzlich willkommen.