サポート ニュース
現在の言語
    言語を変更する

    拡張可能なコンテナハウス

    Z型折りたたみ式コンテナハウス

    X型折りたたみ式コンテナハウス

    組み立て式コンテナハウス
    家製品Z型折りたたみ式コンテナハウス折りたたみ式コンテナハウス工場直送 Z型サンドイッチパネル
    outlet sturdy folding container house z type folded side window
    outlet sturdy folding container house z type folded side window
    Z型折りたたみ式コンテナハウス

    折りたたみ式コンテナハウス工場直送 Z型サンドイッチパネル

    The wall is a 0.28 mm colour steel skin, 50 mm of rock wool at 65 kg/m³, and a second skin, laminated under 180 g/m² of two-part PU adhesive. Panel weight, core density and skin gauge decide how it performs over fifteen years; the name on the brochure does not.

    製品仕様 20フィート
    材料 亜鉛メッキ鋼、304ステンレス鋼
    充填材 ロックウール、EPS、ポリウレタン
    使用温度範囲 -30℃～+70℃
    カスタマイズ 壁パネル、床パネル、電源コンセント、家具、給水口、キッチンキャビネット、衛生陶器など
    工場所在地 広州
    対応配送条件 EXW、FCA、FOB、CIF、DDP
    支払い条件 T/T、L/C、その他の条件は交渉可能
    今すぐお問い合わせください
    WhatsApp
    • 共有：

    製品説明

    Panel Thickness, Weight and Floor Area

    Wall panels are 50 mm thick, roof panels 30 mm, and a square metre of wall panel weighs about 11.5 kg, light enough for two people to carry one sheet by hand. Folded, a z type folding container house makes a shallow pack that loads on a flat bed. At 2,500 mm open width, the floor takes a desk bank and a table. Thicker panels add weight and insulation.

    LayerAs we build itWhat it doesIf you halve it
    Outer skin0.28mmカラー鋼Takes the weather and holds the paint colour0.15 mm dents at a hand push
    Skin coatingZinc plus polyester topcoatCorrosion barrier at cut edgesCut edges rust inside one wet season
    AdhesiveTwo-part PU, 180 g/m²Bonds skin to core across the full faceSkin delaminates above 60 °C surface
    Core, walls50 mm rock wool, 65 kg/m³Fire grade, sound control and shape retention40 kg/m³ wool sags over 2 m height
    Core, roof30 mm rock wool, 60 kg/m³Insulation without adding roof depth20 mm roof panel condenses on the ceiling
    Inner skin0.28mmカラー鋼A cleanable face that hides the core0.20 mm ripples between ribs
    Panel edgeFolded lip, gasket channelThe joint that actually sealsA cut edge needs a trim and still leaks
    Panel width1150 mm nominalFits the 2500 mm module without a rip cutA 1000 mm panel wastes 150 mm per wall
    Panel weightAbout 11.5 kg/m² at 50 mmTwo people carry one panel without a hoist9 kg/m² feels light and sounds hollow
    U value0.80 W/m²K at 50 mm woolSets the heating and cooling load1.3 W/m²K at 30 mm wool
    Fire ratingClass A as an assemblyInsurance and port acceptance turn on thisB1 with EPS, rejected by some ports
    Sound reductionAbout 30 dB at 50 mmSpeech from the next room is muffled24 dB, conversation carries
    Service life15 years with coating intactPaint cycle rather than a panel swap8 years if edges are left bare
    Installation video
    folding container house interconnection

    Skins, Core and the Roof Panel Difference

    Outside, a sandwich panel folding house wears 0.28 mm colour steel under a zinc and polyester coat. A two part PU adhesive bonds skin to core across the whole face. The wall core is 50 mm rock wool at 65 kg density, the roof core 30 mm at 60 kg, that density keeping the wool from settling. A folded lip closes onto a gasket channel.

    Skin and core parts
    · Colour steel coil, zinc and polyester coat
    · Two part PU adhesive
    · 50 mm rock wool batt for walls
    · 30 mm rock wool batt for roof
    · Gasket channel on the long edge

    Wall and roof panels differ in thickness alone. Roof depth costs headroom, so on a z type folding container house the roof takes 30 mm while the walls take 50 mm for sound. Cut to the drawing and labelled by wall, every panel is packed in order. One mislabelled panel slows the fold on site. Spare panels travel with the batch when the order asks.

    Panel schedule
    · 0.28 mm colour steel outer skin
    · 0.28 mm inner skin, cleanable face
    · 50 mm rock wool in the walls
    · 30 mm rock wool in the roof
    · Folded lip with a gasket channel

    U Value, Sound and Fire Behaviour

    U value of 0.80 W comes off a 50 mm wall panel, and that one number sets the heating load for the whole room. Sound reduction reaches about 30 dB, enough to muffle speech from the next room. Class A fire rating counts twice here, at insurance and at port acceptance. Service life runs to 15 years with the coating kept whole. Repainting, not replacement, is the usual cycle.

    Repair kit
    · Touch up paint in the RAL batch
    · Spare gasket in a coil
    · Sealant cartridge for the joint
    · Rivet set for the trim
    · Panel lifting straps Class A fire rating counts twice here, at insurance and at port acceptance. Service life runs to 15 years with the coating kept whole, and repainting, not replacement, is the usual cycle on a z type folding container house.

    Frame Tubes That Carry the Panels

    Frame tube runs 1.5 mm, welded into a rectangle over a 150 mm sill, with posts standing at the corners and at every panel joint, so no panel carries load. The deep floor beam spreads the load. Hinges run stainless, through a folded plate. Every cut end gets a cold galvanizing spray before it sees paint.

    Frame members
    · 1.5 mm galvanized square tube
    · 150 mm sill beam under the deck
    · Deep floor beam on the long side
    · Corner posts at four points
    · Stainless hinge with a folded plate

    Distribution Board, Sockets and Ceiling Lights

    Inside the entry wall, a z type folding container house carries its board, with a main breaker and a leakage trip. LED ceiling lights split across two switches. Sockets sit at desk and bench height, per the drawing. Cable is pulled through the panel void before the skins close. An external light and a socket can be added at the order stage.

    電気キット
    · Lockable board with a main breaker
    · Leakage trip on the socket ring
    · LED ceiling lights on two switches
    · Sockets set to the drawing schedule
    · Lamp over the entrance

    Delivery, Spare Parts and Service Life

    On a flat bed, packs ride to the dock, and a 40HQ takes a stack plus the door and window cartons. Each unit is cradled, filmed and packed with desiccant. Spares cover gaskets, hinge pins, cam locks and window rollers. As an office, a store, a treatment room or a bunk room, the z type folding container house fits. Coating care is what carries the unit toward 15 years.

    ワークショップの生産フロー

    ステップ1：メインフレームの切断
    ステップ2：フレームの組み立て
    ステップ3：フレーム溶接
    ステップ4：フレームの防錆焼付塗装
    ステップ5：パネルの切断
    ステップ6：フレームとパネルの取り付け
    ステップ7：ドアと窓の取り付け
    ステップ8：シーラントで密封する
    ステップ9：完成品倉庫

    工場紹介

    Expandable House Manufacturing Factory

    当社は、プレハブ式コンテナハウス、拡張式コンテナハウス、折りたたみ式コンテナハウス、移動式プレハブ浴室を専門とするメーカーです。ホテル、別荘、オフィス、寮、倉庫、作業場、建設現場向けのモジュール式住宅ソリューションを設計、製造、輸出しています。工場は広州市にあり、敷地面積は5万平方メートルです。ご見学を歓迎いたします。

    タグ:

    Factory Direct Z Type Container House Sandwich Panel Folding Container House z type folding container house

    前へ:

    折りたたみ式コンテナハウス卸売 Z型 組み立て済み

    次：

    折りたたみ式コンテナハウス卸売 Z型迅速展開

    アプリケーションシナリオ

    よくある質問

    • What are the walls made of?

      The walls of a z type folding container house are sandwich panels, a steel skin bonded to a core under pressure. That gives the wall its stiffness and its insulation in one layer.

    • Does it keep cool and warm?

      The sandwich core slows heat in summer and holds warmth in winter, and the room stays usable across the year without heavy heating or cooling.

    • Will it open wide enough?

      At 2,500 mm open width, the floor takes a desk bank and a table. Folded, it keeps a shallow pack for the road.

    • What is the electrical fit?

      Lights, sockets, switches and a breaker board ship fitted and tested. The loom runs through the wall cavity, and no conduit shows.

    • Do many people open it?

      A small crew unfolds the walls by hand and pins them at the corners. It needs a level pad and basic tools, nothing heavier.

    ダウンロード

    関連製品

    WhatsApp

    伝言を残す！

    伝言を残す！