サポート ニュース
現在の言語
    言語を変更する

    拡張可能なコンテナハウス

    Z型折りたたみ式コンテナハウス

    X型折りたたみ式コンテナハウス

    組み立て式コンテナハウス
    家製品X型折りたたみ式コンテナハウス20フィートX型折りたたみ式コンテナハウス 折りたたみ式プレハブ住宅
    custom made durable folding container house x type front window
    export prefab folding container house x type corner window bar
    custom made durable folding container house x type front window
    export prefab folding container house x type corner window bar
    X型折りたたみ式コンテナハウス

    20フィートX型折りたたみ式コンテナハウス 折りたたみ式プレハブ住宅

    A 20ft X type goes up in four moves: land it, level it, swing wall one, swing wall two. The site check takes 30 minutes and wants the pad level to 5 mm across the diagonal, with 1.5 m clear on the long sides. Opening runs 14 minutes then 8, for two people, once the hinge is at its stop and both corner pins are home. No crane, no welding, no wet trades.

    製品仕様 20フィート
    材料 亜鉛メッキ鋼、304ステンレス鋼
    充填材 ロックウール、EPS、ポリウレタン
    使用温度範囲 -30℃～+70℃
    カスタマイズ 壁パネル、床パネル、電源コンセント、家具、給水口、キッチンキャビネット、衛生陶器など
    工場所在地 広州
    対応配送条件 EXW、FCA、FOB、CIF、DDP
    支払い条件 T/T、L/C、その他の条件は交渉可能
    今すぐお問い合わせください
    WhatsApp
    • 共有：

    製品説明

    Folded Slab, Open Height and Lifting Plan

    Folded, the 20ft x type folding container house is a slab one small crew can shift without a crane. Open, that same body gives the floor of a small room and a doorway at standing height. A 3 t crane covers the folded package, so a telehandler handles most plots. Ground layout asks for about 10 m of clear run where the truck backs in.

    StageTimePeopleDone when
    Site check30 min1Pad level within 5 mm across the diagonal, 1.5 m clear on the long sides
    Unload15 min2 + forkliftCastings clear of the trailer and on bearers
    Set on blocks20 min2Four blocks level under the castings
    Cut straps, open wrap5 min1Hardware box and sheet found before opening
    Open and pin wall one14 min2Hinge at its stop with both pins in
    Open wall two8 min2Second wall aligned to the first
    Pin end panel two6 min2Pins home and the shell square
    Bolt the castings10 min28 bolts, torqued in the sequence on the sheet
    Roof seam and hose test10 min1No water at the fold line after 5 minutes
    Electrical connection20 min1 electricianBreaker labelled and trip test passed
    Water connection, if a pod is fitted30 min1 plumberPressure held at 0.6 MPa for 30 minutes
    Interior clean and handover20 min1Checklist signed before the unit is used
    Total, no bathroom podabout 2 h 30 min2 plus tradesOne working day from truck to occupation
    folding container house interconnection

    Welded Chassis, Panel Core and Roof Sheet

    Welded tube forms the chassis, with a continuous bead at every node instead of corner tacks. Columns stand at the four corners and take the lift load as well as the stack above them. Hinges run the full height of each long wall. Each hinge rides a stainless pin, and paint seals the galvanized tube so a joint knocked on site cannot start rusting through.

    Frame and fold parts
    · Welded tube chassis with a full bead at each node
    · Corner column with a lift casting on top
    · Stainless hinge running the height of each wall
    · Galvanized finish under the topcoat
    · Packing shims and spare pins in the crate

    Sandwich board makes the walls of the 20ft x type folding container house, steel skin on both faces with an insulating core between them. The roof repeats that build and adds a profiled sheet that turns rain away from the fold line. Underfoot, a board deck with a wear layer goes down before the walls fold. Tape over every joint keeps driving rain out of the core.

    Loom, Breaker and Ceiling Lights

    Loom, terminations and a test all happen at the plant, so the unit arrives with lights and sockets ready for a single feed. A breaker sits in a small panel by the door, with a leakage trip over the ring. Plugs follow the market the unit ships to. Testing comes before the walls close, the one moment when every run lies open to view.

    Lock Bar Door and Two Sliding Sashes

    Steel leaf, lock bar and a frame braced against the fold close the shell. Two sliding sashes sit on opposite walls, each with a fly screen. Gaskets line both openings and compress flat at the moment the wall locks down against the frame. Once open, the leaf clears the hinge line. Gaskets line both openings and compress flat when the wall locks down, so dust and spray stay outside. Once the leaf clears the hinge line, the sashes slide back and the shell becomes a single open room with a through draught.

    20ft X type folding container house, panel and frame components laid out before assembly

    Plan Check, Partition and Finish

    One room is the standard plan, with partitions cut to order at the plant. A second room can go in before the panels close, and the 20ft x type folding container house is built to a drawing. Colour and cladding come off the same sheet, so a foldable prefab home can leave with that partition already drawn. That sheet settles the plan.

    Straps, Site Delivery and Relief Housing

    Folded units stack on their castings, so a load of shells takes a fraction of the space built rooms would fill. Straps thread the castings and never cross a panel skin. The crate holds the hardware box, a key set and the wiring diagram. Wrap guards the door seals against road spray.

    Guard huts, canteens, clinics and site offices take the same shell, and a camp can start with one unit before a second joins it. Every module packs to one slab size. Relief work rewards a body a truck can move in a single run. The 20ft x type folding container house also serves as a classroom or a store.

    ワークショップの生産フロー

    ステップ1：メインフレームの切断
    ステップ2：フレームの組み立て
    ステップ3：フレーム溶接
    ステップ4：フレームの防錆焼付塗装
    ステップ5：パネルの切断
    ステップ6：フレームとパネルの取り付け
    ステップ7：ドアと窓の取り付け
    ステップ8：シーラントで密封する
    ステップ9：完成品倉庫

    工場紹介

    Expandable House Manufacturing Factory

    当社は、プレハブ式コンテナハウス、拡張式コンテナハウス、折りたたみ式コンテナハウス、移動式プレハブ浴室を専門とするメーカーです。ホテル、別荘、オフィス、寮、倉庫、作業場、建設現場向けのモジュール式住宅ソリューションを設計、製造、輸出しています。工場は広州市にあり、敷地面積は5万平方メートルです。ご見学を歓迎いたします。

    タグ:

    20フィート折りたたみ式コンテナハウス 20ft x type folding container house prefab folding container home

    前へ:

    X字型折りたたみ式コンテナハウス 折りたたみ式コンテナホーム

    次：

    20フィート折りたたみ式コンテナハウス 折りたたみ式プレハブコンテナホーム

    アプリケーションシナリオ

    よくある質問

    • Can a small crew move it without a crane?

      Folded, a 20ft x type folding container house is a slab one small crew can shift without a crane. Open, the same body gives the floor of a small room.

    • What keeps the chassis rigid?

      Welded tube forms the chassis with a continuous bead at every node instead of corner tacks. Columns stand at the four corners and take the lift load through castings.

    • Is the electrical side tested?

      Loom, terminations and a test all happen at the plant, and the unit arrives with lights and sockets ready for a single feed. A breaker sits in a small panel near the door.

    • Is it quick to open on site?

      Two people finish the fold in about two hours once the package sits level on its pads. It needs roughly a level pad and a few hand tools.

    • What uses suit it?

      Guard huts, canteens, clinics and site offices. A camp can start with one unit before a second joins it, since every module packs flat

    ダウンロード

    関連製品

    WhatsApp

    伝言を残す！

    伝言を残す！