Folding Container House Custom OEM Z Type Flat Packed

Span, Packed Depth and Ordered Mass

Open, a custom z type folding container house measures 5,800 mm by 2,500 mm, and the pad has to carry that footprint exactly. That is about 14.5 m² of floor, with 2,430 mm of internal height, so a standing adult clears the ceiling. Folded, the pack sits 390 mm deep and stacks on a flat rack. Weight runs 1,100 kg on a standard build and 1,180 kg when the panel order gets thicker. The crane, the lorry and the pad all follow from those numbers.

Item	Construção padrão	What an OEM order can move it to	Fixed at
Pegada	5800 × 2500 × 2430 mm	Length 5800 to 6000 mm, width to 2500 mm only	Steel cut
Folded thickness	390 mm	430 mm if walls go to 75 mm, which costs one set per 40HQ	Laminação de painéis
Unit weight	1100 kg	1180 kg with a 75 mm core, 1040 kg with EPS	Laminação de painéis
Seção da estrutura	Pilar de 63 × 80 × 1,5 mm	2.0 mm wall on the six folding posts only	Tube mill
Coluna	150 × 62 × 1.5 mm U-groove	2.0 mm, or 160 mm depth for a second storey	Steel cut
Núcleo da parede	Lã de rocha de 50 mm a 65 kg/m³	75 mm wool, EPS at 12 kg/m³, or PU at 40 kg/m³	Laminação de painéis
Revestimento de parede	Aço colorido de 0,28 mm	0.35 mm, wood grain, matte, or a printed wrap	Coil order
Teto	1040 tile 0.45 mm, 30 mm wool	75 mm roof panel, or a standing seam profile	Coil order
Chão	15 mm MGO, 1.6 mm wear layer	18 mm cement board, SPC, or a plywood deck	Panel layup
Porta	970 × 1970 mm aluminium anti-theft	840 × 2030 com moldura ou folha dupla	Frame weld
Windows	2 × 870 × 1215 mm deslizante	3 or 4 openings, awning, fixed, or full height	Frame weld
Elétrica	1 breaker, 3 sockets, 5 LED lights	Circuit split, 110 or 220 V, external inlet	Wiring
Insulation value	About R 1.3 for the 50 mm wall	R 1.9 at 75 mm, R 2.1 with 50 mm PU	Laminação de painéis
Cor	Uma camada de revestimento em pó RAL	One colour as standard, two tones when ordered	Powder coat
Marcação	Apenas marcas de envio	Numbers stencilled for routing across a site	Embalagem
Documentos	Fatura, lista de embalagem, conhecimento de embarque, CO	Paperwork that clears customs without a delay	Before loading
Minimum run	1 unidade	10 units for a dedicated lamination run	Order
Tempo de espera	15 to 20 days	25 to 30 days once the coil is ordered	Coil order

Installation video

Tube Sizes, Panel Skin and Core

Square tube comes in two wall thicknesses, 2.0 mm on the main beams and 1.5 mm through the cross members and braces. A 160 mm sill beam carries the floor deck. At each corner stand 100 mm posts. Hinge barrels run stainless and bolt through a 200 mm plate. Every tube end gets capped and sprayed with cold galvanizing before paint.

Chassis schedule
· 2.0 mm galvanized main beam along each long side
· 1.5 mm cross members under the floor deck
· 160 mm sill beam with a folded top lip
· 100 mm corner posts, four to a unit
· 200 mm hinge plate in stainless steel

Outside, a custom z type folding container house carries 0.28 mm colour steel, with a 0.35 mm liner facing the room. A 50 mm core sits between them, bonded across the full face with a two part adhesive. Roof panels follow the same build, and the floor deck is 15 mm board. Panel edges fold into a lip that takes a gasket. Two people carry one finished panel by hand.

Panel and deck build
· 0.28 mm steel skin on the outer face
· 0.35 mm liner on the room side
· 50 mm insulated core, bonded full face
· 15 mm floor deck under a wear sheet
· Folded edge with a rubber gasket seat

Main Board, Ceiling Lights and Sockets

Wiring runs through the panel voids and terminates at marked boxes. Inside sit a main switch, an earth leakage trip and spare ways for the circuits that will be added later on site. Lamps and sockets sit on separate circuits. Heights for every switch follow the drawing agreed at order. An outside socket and a light over the door can join the same loom.

Kit elétrico
· Distribution board with spare ways
· Leakage trip on the socket ring
· Ceiling lamps on a switched circuit
· Wall sockets at drawing heights
· External light over the entry door Spare ways sit in the board for the circuits that will be added later on site, and an outside socket plus a light over the door can join the same loom.

Erection Steps and Site Labour Needs

Once the pack is on the pad, erection needs no crane. Four workers cut the banding, lift the roof frame and stand the long walls, with pins dropping into the corners behind them. Roof cams draw the seam closed. End panels slide into their channels, and the door is checked for swing. The drawing carries a crew through the next unit.

Crew hand tools
· Banding cutter and a rubber mallet
· Podger bar for the corner pins
· Spirit level for the pad
· Sealant gun and two spare nozzles
· Touch up paint in the RAL shade

Crate Packing, Export Papers and Field Use

Flat, a custom z type folding container house stacks into a 40HQ at 50 mm wall thickness. Timber cradles take each unit and film wraps the pack. For a long sea leg, desiccant bags go inside before the wrap closes. Lifting points stay clear of the film, so a crane hook can still reach them. Outside marking matches the packing list and the frame stencil.

Packing list
· Timber cradle under each corner
· Shrink film over the folded pack
· Desiccant bags inside the wrap
· Corner guards on the castings
· Packing list in a weatherproof pouch

Documents ride with a custom z type folding container house: invoice, packing list, bill of lading and certificate of origin. Mill certificates, test reports and stamped drawings can join an OEM order. At the plant, spares cover pins, roof cams, sash rollers and lock barrels. The same body takes work as an office, a spare room, a clinic bay or a staff cabin.

Fluxo de produção da oficina

Apresentação da fábrica

Somos um fabricante profissional especializado em casas pré-fabricadas em contêineres, casas expansíveis em contêineres, casas dobráveis em contêineres e banheiros móveis pré-fabricados. Projetamos, produzimos e exportamos soluções de habitação modular para hotéis, vilas, escritórios, dormitórios, armazéns, oficinas e canteiros de obras. Nossa fábrica ocupa uma área de 50.000 metros quadrados e está localizada em Guangzhou. Visitantes são bem-vindos.

especificações do produto	20 pés
material	Aço galvanizado, aço inoxidável 304
material de enchimento	lã de rocha, EPS e poliuretano
Faixa de temperatura de serviço	-30°C a +70°C
Personalização	Painéis de parede, painéis de piso, tomadas elétricas, móveis, entradas de água, armários de cozinha, louças sanitárias e assim por diante.
Localização da fábrica	GUANGZHOU

Termos de envio aceitos	EXW, FCA, FOB, CIF, DDP
Condições de pagamento	T/T, L/C, outras condições negociáveis

Idioma atual

Alterar idioma

Casa contêiner dobrável personalizada OEM tipo Z, desmontada e embalada.

Descrição do produto

Span, Packed Depth and Ordered Mass

Tube Sizes, Panel Skin and Core

Main Board, Ceiling Lights and Sockets

Erection Steps and Site Labour Needs

Crate Packing, Export Papers and Field Use

Fluxo de produção da oficina

Apresentação da fábrica

Cenários de aplicação

Perguntas frequentes

Download

Produto relacionado