Wsparcie Aktualności
Aktualny język
    Zmień język

    Rozszerzalny dom kontenerowy

    Składany dom kontenerowy typu Z

    Składany dom kontenerowy typu X

    Dom z kontenerów składanych na płasko
    DomProduktySkładany dom kontenerowy typu XSkładany dom kontenerowy Składany dom kontenerowy na sprzedaż
    export sturdy folding container house x type x frame wood floor
    oem luxury folding container house x type exterior lifting hook
    export sturdy folding container house x type x frame wood floor
    oem luxury folding container house x type exterior lifting hook
    Składany dom kontenerowy typu X

    Składany dom kontenerowy Składany dom kontenerowy na sprzedaż

    A 20ft X type folds to 390 mm, so six units stack in the footprint of one and a 3 t forklift handles the 1100 kg package. Open, it gives 14.5 m² at 2265 mm clear height, enough for two bunks and a table or a double bed and a wardrobe. The frame is 1.5 mm steel, welded continuously at every joint. Two people open it in twenty minutes, no crane.

    specyfikacje produktu 20 stóp
    tworzywo Stal ocynkowana, stal nierdzewna 304
    materiał wypełniający wełna mineralna, EPS i poliuretan
    Zakres temperatur pracy -30°C do +70°C
    Personalizacja panele ścienne, panele podłogowe, gniazdka elektryczne, meble, przyłącza wodne, szafki kuchenne, urządzenia sanitarne itp.
    Lokalizacja fabryki KANTON
    Obsługiwane warunki wysyłki EXW, FCA, FOB, CIF, DDP
    Warunki płatności T/T, L/C, inne warunki do negocjacji
    Zapytaj teraz
    WhatsApp
    • Udział:

    Opis produktu

    Folded Size, Open Floor and Weight

    Open, the x type foldable container house gives a 14.5 m² floor, enough for a small office or a dormitory room. In travel trim the same body stands 390 mm high, so several shells ride on one trailer deck. Ceiling height reaches 2430 mm, with 2265 mm clear under the closed panels. The bare frame weighs 1,100 kg and lifts on four corner castings. Either a forklift or a light crane takes the folded package. Nothing needs a spreader beam.

    PrzedmiotFigureCo decyduje
    Open size, L×W×H5800 × 2500 × 2430 mm14.5 m² of floor; fits a 20ft footprint plus 100 mm
    Internal size5635 × 2370 × 2265 mm2265 mm clear height takes a standard door and a bunk
    Folded size5800 × 2500 × 390 mmSets how many shells ride on one trailer deck
    Gross weight1100 kgA 3 t forklift handles it; no crane on site
    Floor area14.5 m²Decides bed count and desk space in one room
    Frame1.5 mm steel, fully weldedContinuous weld keeps the chassis square under lift
    Słupek narożny150 × 62 × 1.5 mm U-groove galvanizedCarries lift load and the weight of a stack
    Odlewanie narożnikówOdlew stalowy 195 × 100 × 15 mmTwist locks and slings land on these four points
    Zawias304 stainless, 85 × 115 × 3 mmThe part that wears; 304 rather than coated steel
    Panel ścienny0.28 mm steel + 50 mm rock wool, 65 kg/m³Rock wool core sets the fire class and heat gain
    Dach1040 profiled steel 0.45 mm, 30 mm rock woolThe 0.45 mm skin resists foot traffic during installation
    Sufit831 panel, 0.28 mmComes off for wiring work after handover
    Podłoga15 mm MGO board, 1.6 mm adhesive layerMGO deck resists swelling if water gets in
    DrzwiDrzwi antywłamaniowe aluminiowe 970 × 1970 mmNarrow leaf limits what furniture passes through
    Okna2 × 870 × 1215 mm aluminium slidingTwo openings give cross flow with the door open
    Elektryka1 breaker, 2 US sockets, 1 × 110 V socket, 5 LED lightsSized for lights and a kettle, not cooking
    Obciążenie dachu0,5 kN/m²Holds snow and a maintenance visit, not storage
    Obciążenie podłogi2,0 kN/m²Bunk beds, lockers and a full room of people
    Ciśnienie ścienne0.8 kN/m²Wind on the panel face, checked with anchors
    Fire ratingClass ARock wool core earns the class, foam does not
    SejsmicznyPoziom 8Układ kotwicy jest wydawany dla każdej lokalizacji

    Galvanized Steel Frame and Welded Joints

    The chassis is welded from 1.5 mm steel tube, a continuous bead at every node rather than a spot weld. U-groove columns of 62 mm carry the lift and the stack load at all four corners of the shell. A cast steel block caps each one, drilled for the twist lock. Under the deck a 160 mm sill beam ties the posts together. Coating follows the weld, so no bare edge leaves the plant. No bare metal shows at a joint.

    Frame and lifting hardware
    · 1.5 mm welded steel tube, continuous bead at each node
    · 62 mm U-groove corner column on all four corners
    · Cast steel corner block drilled for the twist lock
    · 160 mm deep sill beam under the deck
    · Zinc rich primer and topcoat after welding

    Rock Wool Panels, Floor and Ceiling Build

    Wall panels pair 0.28 mm colour steel skins with a 50 mm rock wool core, 65 kg for each cubic metre. That core earns the wall a Class A result and slows heat gain under strong sun. Underfoot, a 15 mm MGO board carries a 1.6 mm wearing surface and does not swell after a leak. Overhead, a removable 0.28 mm ceiling panel hides the wiring, and a 0.45 mm profiled sheet covers the roof above 30 mm of wool. Taped joints close every seam before the shell ships.

    Breaker, Sockets and Ceiling Lights

    Power enters through one breaker, and the loom is pulled before the wall panels close. Two US sockets and a single 110 V point serve a laptop, a fan and a kettle. Five LED lights share one ceiling circuit. The load is sized for lighting and small appliances, not a cooking ring. Leakage protection covers the socket ring, and each breaker carries a label.

    Two Workers Unfold the Walls in Place

    Two people open the x type foldable container house without a crane, working outward from the corner castings. Each long wall swings on its hinge until the pin drops into the stop. End panels lift from the crate and pin to the columns. Levelling the pad takes longer than the fold itself, and that is the slow part of the day. No welding or wet trade reaches the site. Each wall is balanced on its hinge, so one person steadies the panel while the other drops the pin. Once the corner castings sit level, the end panels lift from the crate and pin to the columns, and the shell squares itself as the pins go in.

    Six Folded Units per Freight Space

    Folded, the shell is a slab 390 mm deep, and six of them stack in the footprint of one unit. Slings pass through the castings. Straps never cross a panel face. A shrink wrap shields the seals from road spray, and the hardware box rides inside the top shell. Every unit leaves with a key set and a wiring diagram.

    Site Offices, Dormitories and Clinics

    One shell serves site offices, staff dormitories, clinics and small shops. Camps add units as the crew grows, because every module folds to one slab size. In disaster response the fold matters more than the finish, since a single truck moves a whole batch. The x type foldable container house also serves as a gatehouse or a canteen.

    Przepływ produkcji warsztatowej

    Krok 1: Cięcie ramy głównej
    Krok 2: Montaż ramy
    Krok 3: Spawanie ramy
    Krok 4: Powłoka antykorozyjna ramy
    Krok 5: Cięcie paneli
    Krok 6: Montaż ramy i panelu
    Krok 7: Montaż drzwi i okien
    Krok 8: Uszczelnianie środkiem uszczelniającym
    Krok 9: Magazyn wyrobów gotowych

    Wprowadzenie do fabryki

    Expandable House Manufacturing Factory

    Jesteśmy profesjonalnym producentem specjalizującym się w prefabrykowanych domach kontenerowych, rozkładanych domach kontenerowych, składanych domach kontenerowych oraz mobilnych łazienkach prefabrykowanych. Projektujemy, produkujemy i eksportujemy modułowe rozwiązania mieszkaniowe dla hoteli, willi, biur, akademików, magazynów, warsztatów i placów budowy. Nasza fabryka zajmuje powierzchnię 50 000 metrów kwadratowych i znajduje się w Kantonie. Zapraszamy gości.

    Tagi:

    foldable container home foldable container house for sale folding container house

    poprzedni:

    20-stopowy składany dom kontenerowy Składany prefabrykowany dom kontenerowy

    Scenariusze zastosowań

    Często zadawane pytania

    • How small is it when folded?

      In travel trim the body stands 390 mm high, and several shells ride in the space of one built unit. Open, an x type foldable container house gives 14.5 m² of floor, enough for a small office or a dormitory room.

    • Do two people manage it alone?

      Two people open it without a crane, working outward from the corner castings. Each long wall swings on its hinge until the pin drops into the stop

    • What keeps it strong?

      The chassis is welded from 1.5 mm steel tube with a continuous bead at every node, not a spot weld. U-groove columns of 62 mm carry the lift and the stack load at all four corners.

    • How does it handle heat?

      The walls pair 0.28 mm colour steel skins with a 50 mm rock wool core, which earns the wall a Class A fire rating and slows heat gain under strong sun.

    • Where do these units usually go?

      Site offices, staff dormitories, clinics and small shops. Camps add units as the crew grows, and in disaster response the same shell deploys fast.

    Pobierać

    Powiązany produkt

    WhatsApp

    Zostaw wiadomość!

    Zostaw wiadomość!