Podpora Zprávy
Aktuální jazyk
    Změnit jazyk

    Rozšiřitelný kontejnerový dům

    Skládací kontejnerový dům typu Z

    Skládací kontejnerový dům typu X

    Kontejnerový dům s plochým balením
    DomovProduktySkládací kontejnerový dům typu XSkládací kontejnerový dům Skládací kontejnerový dům na prodej
    export sturdy folding container house x type x frame wood floor
    oem luxury folding container house x type exterior lifting hook
    export sturdy folding container house x type x frame wood floor
    oem luxury folding container house x type exterior lifting hook
    Skládací kontejnerový dům typu X

    Skládací kontejnerový dům Skládací kontejnerový dům na prodej

    A 20ft X type folds to 390 mm, so six units stack in the footprint of one and a 3 t forklift handles the 1100 kg package. Open, it gives 14.5 m² at 2265 mm clear height, enough for two bunks and a table or a double bed and a wardrobe. The frame is 1.5 mm steel, welded continuously at every joint. Two people open it in twenty minutes, no crane.

    specifikace produktu 20 stop
    materiál Pozinkovaná ocel, nerezová ocel 304
    výplňový materiál minerální vlna, EPS a polyuretan
    Rozsah provozních teplot -30 °C až +70 °C
    Přizpůsobení stěnové panely, podlahové panely, elektrické zásuvky, nábytek, přívody vody, kuchyňské skříňky, sanitární keramika a tak dále
    Umístění továrny KAN-ČOU
    Podporované dodací podmínky EXW, FCA, FOB, CIF, DDP
    Platební podmínky T/T, L/C, další podmínky dohodou
    Zeptejte se nyní
    WhatsApp
    • Podíl:

    Popis produktu

    Folded Size, Open Floor and Weight

    Open, the x type foldable container house gives a 14.5 m² floor, enough for a small office or a dormitory room. In travel trim the same body stands 390 mm high, so several shells ride on one trailer deck. Ceiling height reaches 2430 mm, with 2265 mm clear under the closed panels. The bare frame weighs 1,100 kg and lifts on four corner castings. Either a forklift or a light crane takes the folded package. Nothing needs a spreader beam.

    PoložkaFigureCo rozhoduje
    Open size, L×W×H5800 × 2500 × 2430 mm14.5 m² of floor; fits a 20ft footprint plus 100 mm
    Internal size5635 × 2370 × 2265 mm2265 mm clear height takes a standard door and a bunk
    Folded size5800 × 2500 × 390 mmSets how many shells ride on one trailer deck
    Gross weight1100 kgA 3 t forklift handles it; no crane on site
    Floor area14.5 m²Decides bed count and desk space in one room
    Frame1.5 mm steel, fully weldedContinuous weld keeps the chassis square under lift
    Rohový sloupek150 × 62 × 1.5 mm U-groove galvanizedCarries lift load and the weight of a stack
    Rohové odlitkyLitá ocel 195 × 100 × 15 mmTwist locks and slings land on these four points
    Závěs304 stainless, 85 × 115 × 3 mmThe part that wears; 304 rather than coated steel
    Nástěnný panel0.28 mm steel + 50 mm rock wool, 65 kg/m³Rock wool core sets the fire class and heat gain
    Střecha1040 profiled steel 0.45 mm, 30 mm rock woolThe 0.45 mm skin resists foot traffic during installation
    Strop831 panel, 0.28 mmComes off for wiring work after handover
    Patro15 mm MGO board, 1.6 mm adhesive layerMGO deck resists swelling if water gets in
    DveřeHliníkové bezpečnostní dveře 970 × 1970 mmNarrow leaf limits what furniture passes through
    Okna2 × 870 × 1215 mm aluminium slidingTwo openings give cross flow with the door open
    Elektroinstalace1 breaker, 2 US sockets, 1 × 110 V socket, 5 LED lightsSized for lights and a kettle, not cooking
    Zatížení střechy0,5 kN/m²Holds snow and a maintenance visit, not storage
    Zatížení podlahy2,0 kN/m²Bunk beds, lockers and a full room of people
    Tlak na stěnu0.8 kN/m²Wind on the panel face, checked with anchors
    Fire ratingClass ARock wool core earns the class, foam does not
    SeismickéÚroveň 8Pro každé místo je vydáno rozvržení kotev

    Galvanized Steel Frame and Welded Joints

    The chassis is welded from 1.5 mm steel tube, a continuous bead at every node rather than a spot weld. U-groove columns of 62 mm carry the lift and the stack load at all four corners of the shell. A cast steel block caps each one, drilled for the twist lock. Under the deck a 160 mm sill beam ties the posts together. Coating follows the weld, so no bare edge leaves the plant. No bare metal shows at a joint.

    Frame and lifting hardware
    · 1.5 mm welded steel tube, continuous bead at each node
    · 62 mm U-groove corner column on all four corners
    · Cast steel corner block drilled for the twist lock
    · 160 mm deep sill beam under the deck
    · Zinc rich primer and topcoat after welding

    Rock Wool Panels, Floor and Ceiling Build

    Wall panels pair 0.28 mm colour steel skins with a 50 mm rock wool core, 65 kg for each cubic metre. That core earns the wall a Class A result and slows heat gain under strong sun. Underfoot, a 15 mm MGO board carries a 1.6 mm wearing surface and does not swell after a leak. Overhead, a removable 0.28 mm ceiling panel hides the wiring, and a 0.45 mm profiled sheet covers the roof above 30 mm of wool. Taped joints close every seam before the shell ships.

    Breaker, Sockets and Ceiling Lights

    Power enters through one breaker, and the loom is pulled before the wall panels close. Two US sockets and a single 110 V point serve a laptop, a fan and a kettle. Five LED lights share one ceiling circuit. The load is sized for lighting and small appliances, not a cooking ring. Leakage protection covers the socket ring, and each breaker carries a label.

    Two Workers Unfold the Walls in Place

    Two people open the x type foldable container house without a crane, working outward from the corner castings. Each long wall swings on its hinge until the pin drops into the stop. End panels lift from the crate and pin to the columns. Levelling the pad takes longer than the fold itself, and that is the slow part of the day. No welding or wet trade reaches the site. Each wall is balanced on its hinge, so one person steadies the panel while the other drops the pin. Once the corner castings sit level, the end panels lift from the crate and pin to the columns, and the shell squares itself as the pins go in.

    Six Folded Units per Freight Space

    Folded, the shell is a slab 390 mm deep, and six of them stack in the footprint of one unit. Slings pass through the castings. Straps never cross a panel face. A shrink wrap shields the seals from road spray, and the hardware box rides inside the top shell. Every unit leaves with a key set and a wiring diagram.

    Site Offices, Dormitories and Clinics

    One shell serves site offices, staff dormitories, clinics and small shops. Camps add units as the crew grows, because every module folds to one slab size. In disaster response the fold matters more than the finish, since a single truck moves a whole batch. The x type foldable container house also serves as a gatehouse or a canteen.

    Výrobní tok v dílně

    Krok 1: Řezání hlavního rámu
    Krok 2: Sestavení rámu
    Krok 3: Svařování rámu
    Krok 4: Rámový antikorozní nátěr proti korozi
    Krok 5: Řezání panelů
    Krok 6: Instalace rámu a panelu
    Krok 7: Instalace dveří a oken
    Krok 8: Utěsnění tmelem
    Krok 9: Sklad hotových výrobků

    Úvod do továrny

    Expandable House Manufacturing Factory

    Jsme profesionální výrobce specializující se na prefabrikované kontejnerové domy, rozkládací kontejnerové domy, skládací kontejnerové domy a mobilní prefabrikované koupelny. Navrhujeme, vyrábíme a exportujeme modulární bytová řešení pro hotely, vily, kanceláře, ubytovny, sklady, dílny a staveniště. Naše továrna se rozkládá na ploše 50 000 metrů čtverečních a nachází se v Kantonu. Návštěvníci jsou vítáni.

    Štítky:

    foldable container home foldable container house for sale folding container house

    předchozí:

    20 stop skládací kontejnerový dům skládací prefabrikovaný kontejnerový dům

    Scénáře aplikací

    Často kladené otázky

    • How small is it when folded?

      In travel trim the body stands 390 mm high, and several shells ride in the space of one built unit. Open, an x type foldable container house gives 14.5 m² of floor, enough for a small office or a dormitory room.

    • Do two people manage it alone?

      Two people open it without a crane, working outward from the corner castings. Each long wall swings on its hinge until the pin drops into the stop

    • What keeps it strong?

      The chassis is welded from 1.5 mm steel tube with a continuous bead at every node, not a spot weld. U-groove columns of 62 mm carry the lift and the stack load at all four corners.

    • How does it handle heat?

      The walls pair 0.28 mm colour steel skins with a 50 mm rock wool core, which earns the wall a Class A fire rating and slows heat gain under strong sun.

    • Where do these units usually go?

      Site offices, staff dormitories, clinics and small shops. Camps add units as the crew grows, and in disaster response the same shell deploys fast.

    Stáhnout

    Související produkt

    WhatsApp

    Zanechte zprávu!

    Zanechte zprávu!